{"title":"LS Swap Parts \u0026 Accessories","description":"\u003cp\u003eEverything for your LS swap or LS build in one spot. Throttle body adapters and spacers, fuel rails, steam vent kits, alternator and power steering brackets, pulleys, oil system parts, engine tools and more for LS1, LS2, LS3, LS6, LQ4, LQ9, L92, 4.8, 5.3, 6.0 and 6.2 engines. Need AN fittings to plumb it up? Check out our AN fittings range.\u003c\/p\u003e","products":[{"product_id":"ls-engine-swap-male-m16x1-5-or-m12x1-5-female-1-8-npt-aluminum-oil-pressure-sensor-adapter-connector-with-gasket-silver","title":"LS Oil Pressure Sensor Adapter M16 x 1.5 or M12 x 1.5 to 1\/8\" NPT","description":"\u003cp\u003eRun an aftermarket oil pressure sender or gauge line on an LS. Screws into the factory sensor port and gives you a 1\/8\" NPT female thread to suit most gauges and senders.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM16 x 1.5 or M12 x 1.5 male (see options)\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT female\u003c\/li\u003e\n\u003cli\u003eSealing washer included\u003c\/li\u003e\n\u003cli\u003eAluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich thread does my LS use for the oil pressure sensor?\u003c\/strong\u003e\u003cbr\u003eGen III LS engines mostly use M16 x 1.5, and many Gen IV use M12 x 1.5. Check the old sensor thread before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre AN and NPT the same?\u003c\/strong\u003e\u003cbr\u003eNo. AN is a straight thread that seals on a 37 degree flare. NPT is a tapered pipe thread that seals on the thread itself with sealant. You need an adapter to go from one to the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Australia use BSP or NPT?\u003c\/strong\u003e\u003cbr\u003eBoth turn up. Most American engine parts, gauges, pumps and senders are NPT, while some local and Euro gear is BSP. Check your port before you order, they do not interchange.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, precision CNC-machined from solid aluminium, not cheap cast or pot-metal fittings\u003c\/li\u003e\n\u003cli\u003eTough anodised finish, clean, accurate threads\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"M12 x 1.5","offer_id":67628652527917,"sku":"1005005195025876-M12x1.5","price":6.99,"currency_code":"AUD","in_stock":true},{"title":"M16 x 1.5","offer_id":67628652560685,"sku":"1005005195025876-M16x1.5","price":7.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S44b0c7c4a060478b95f48563da61eb760.webp?v=1791705334"},{"product_id":"1pc-aluminum-6an-8an-male-to-3-8-5-16-quick-disconnect-male-push-on-efi-fitting-adapter-quick-connect","title":"LS Fuel Rail Adapter AN6 AN8 to 3\/8\" 5\/16\" EFI Quick Connect Fitting","description":"\u003cp\u003eThe fitting you need to run AN braided line to an LS fuel rail, EFI filter or factory hard line with push-on quick connects. No cutting or re-flaring factory lines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAN6 or AN8 to 3\/8\" or 5\/16\" EFI quick connect\u003c\/li\u003e\n\u003cli\u003eStraight and 90 degree styles (see photos)\u003c\/li\u003e\n\u003cli\u003eAluminium body\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich style do I need?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale Socket (Blue or Black Clip):\u003c\/strong\u003e male AN thread one end, quick-connect socket the other. Clicks straight onto a male EFI tube, like the inlet on an LS fuel rail or a factory hard line. Both clips do the same job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Male Spigot:\u003c\/strong\u003e male AN thread one end, male EFI tube the other. Plugs into a factory female quick connect, like the end of a factory fuel hose or filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° Elbow Male Spigot:\u003c\/strong\u003e female AN swivel one end, male EFI tube the other, at 90 degrees. Same job as the straight spigot where space is tight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e3\/8\" or 5\/16\" is the size of the factory EFI tube you are connecting to. Most LS rails are 3\/8\".\u003c\/p\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN6\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN8\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12.7 mm\u003c\/td\u003e\n\u003ctd\u003e3\/4\"-16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel fitting does an LS engine use?\u003c\/strong\u003e\u003cbr\u003eMost LS fuel rails use a 3\/8\" quick connect, some use 5\/16\". An AN6 to 3\/8\" quick connect adapter is the most common way to run braided line to an LS rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line do I need for my horsepower?\u003c\/strong\u003e\u003cbr\u003eAs a rough guide on petrol EFI: AN6 is good to around 500 hp, AN8 to around 800 hp, AN10 beyond that. E85 needs about 30 percent more fuel, so go up a size if you are running it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo AN fittings need thread tape or sealant?\u003c\/strong\u003e\u003cbr\u003eNo. The seal is made on the 37 degree flare, not the thread, so keep tape and sealant off the AN side. Only the NPT (tapered pipe) end of an adapter needs sealant.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, precision CNC-machined from solid aluminium, not cheap cast or pot-metal fittings\u003c\/li\u003e\n\u003cli\u003eTough anodised finish, clean threads and true 37 degree flares that seal properly\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"AN6 to 3\/8\" - Female Socket (Blue Clip)","offer_id":67628654297389,"sku":"1005008081764703-AN6 to 3-8","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 3\/8\" - Female Socket (Black Clip)","offer_id":67628654395693,"sku":"1005008081764703-AN6 to 3-8 1","price":6.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 3\/8\" - 90° Elbow Male Spigot","offer_id":67628654461229,"sku":"1005008081764703-AN6 to 3-8 2","price":8.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 3\/8\" - Straight Male Spigot","offer_id":67628654526765,"sku":"1005008081764703-AN6 to 3-8 3","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 5\/16\" - Female Socket (Blue Clip)","offer_id":67628654166317,"sku":"1005008081764703-AN6 to 5-16","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 5\/16\" - Female Socket (Black Clip)","offer_id":67628654199085,"sku":"1005008081764703-AN6 to 5-16 1","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 5\/16\" - 90° Elbow Male Spigot","offer_id":67628654231853,"sku":"1005008081764703-AN6 to 5-16 2","price":8.99,"currency_code":"AUD","in_stock":true},{"title":"AN6 to 5\/16\" - Straight Male Spigot","offer_id":67628654362925,"sku":"1005008081764703-AN6 to 5-16 3","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN8 to 3\/8\" - Female Socket (Blue Clip)","offer_id":67628654264621,"sku":"1005008081764703-AN8 to 3-8","price":8.99,"currency_code":"AUD","in_stock":true},{"title":"AN8 to 3\/8\" - Female Socket (Black Clip)","offer_id":67628654330157,"sku":"1005008081764703-AN8 to 3-8 1","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN8 to 3\/8\" - Straight Male Spigot","offer_id":67628654428461,"sku":"1005008081764703-AN8 to 3-8 2","price":7.99,"currency_code":"AUD","in_stock":true},{"title":"AN8 to 5\/16\" - Straight Male Spigot","offer_id":67628654493997,"sku":"1005008081764703-AN8 to 5-16","price":7.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sd64c168406434d6385deccf1ad013322q.webp?v=1791705335"},{"product_id":"black-billet-fuel-rail-kit-for-oe-ls1-ls6-intake-manifold-6an-hardware-fpr-1045","title":"LS1 LS6 Billet Fuel Rail Kit, 6AN, Black, with Crossover Line and Hardware","description":"\u003cp\u003eBillet fuel rails for the factory LS1 and LS6 intake. More fuel volume than the factory rail, AN6 fittings on both ends, and a braided crossover. Comes with the brackets and bolts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits factory LS1 and LS6 intake manifold\u003c\/li\u003e\n\u003cli\u003eAN6 (-6) fittings, braided crossover line\u003c\/li\u003e\n\u003cli\u003eBrackets, bolts and O-rings included\u003c\/li\u003e\n\u003cli\u003eBlack anodised billet aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eAN6\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these fuel rails fit my LS?\u003c\/strong\u003e\u003cbr\u003eThey are made for the factory LS1 and LS6 intake manifold. Truck and LS3 style intakes use different rails, so check your intake before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need new injectors with aftermarket LS fuel rails?\u003c\/strong\u003e\u003cbr\u003eNo, your existing injectors go straight in with the rails. Check the O-rings while you are in there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line do I need for my horsepower?\u003c\/strong\u003e\u003cbr\u003eAs a rough guide on petrol EFI: AN6 is good to around 500 hp, AN8 to around 800 hp, AN10 beyond that. E85 needs about 30 percent more fuel, so go up a size if you are running it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel fitting does an LS engine use?\u003c\/strong\u003e\u003cbr\u003eMost LS fuel rails use a 3\/8\" quick connect, some use 5\/16\". An AN6 to 3\/8\" quick connect adapter is the most common way to run braided line to an LS rail.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, precision CNC-machined from solid aluminium, not cheap cast or pot-metal fittings\u003c\/li\u003e\n\u003cli\u003eTough anodised finish, clean threads and true 37 degree flares that seal properly\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628779962669,"sku":"1005010142460049-black","price":112.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Se12b64bbadd94910bfdffd12afaea7b9q.webp?v=1791709930"},{"product_id":"4-bolt-throttle-cable-bracket-fit-for-ls-ls2-ls3-ls6-ls7-engines-intakes-92mm-102mm-81012-81042","title":"LS Throttle Cable Bracket 4 Bolt, for 92 mm and 102 mm Throttle Bodies","description":"\u003cp\u003eRunning a cable throttle on an LS swap? This bracket bolts to the 4 bolt throttle body flange and gives you a solid mount for the throttle cable and cruise or kickdown cable.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS 4 bolt intakes with 92 mm or 102 mm throttle bodies\u003c\/li\u003e\n\u003cli\u003eLS1, LS2, LS3, LS6, LS7\u003c\/li\u003e\n\u003cli\u003eBlack anodised\u003c\/li\u003e\n\u003cli\u003eBillet aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I run a cable throttle on an LS?\u003c\/strong\u003e\u003cbr\u003eYes. Many LS swaps use a cable throttle body with a bracket like this, which is simpler than drive-by-wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit a drive-by-wire throttle body?\u003c\/strong\u003e\u003cbr\u003eNo. It is for cable-operated throttle bodies.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628822659373,"sku":"1005008784663386-black","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sa380d62b090d4bada82ade3c012b70b1b.webp?v=1791714671"},{"product_id":"heater-core-bypass-hose-coolant-crossover-u-type-water-pump-rubber-pipe-for-ls-lt-engine-lm7-lr4-lq4-ls6-l59-lq9-lm4-l33-551699","title":"LS Heater Bypass Hose, Coolant Crossover U Pipe for LS1 LS2 LS3 LQ4","description":"\u003cp\u003eRunning an LS swap without a heater? This U shaped hose loops the two heater ports on the water pump so coolant keeps circulating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS water pump heater ports\u003c\/li\u003e\n\u003cli\u003eLS1, LS2, LS3, LQ4, LM7 and similar\u003c\/li\u003e\n\u003cli\u003eRubber hose\u003c\/li\u003e\n\u003cli\u003eUse with hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I run an LS without a heater core?\u003c\/strong\u003e\u003cbr\u003eYes, but loop the heater ports together with a bypass hose so coolant still flows through that circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit a truck water pump?\u003c\/strong\u003e\u003cbr\u003eIt suits the common LS water pump heater outlets. Check the photos against your pump.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from rubber\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628831932717,"sku":"1005005195097056-black","price":16.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S4f8a7d173ea54260a2da203c21a26baeB.webp?v=1791714666"},{"product_id":"power-steering-tank-for-holden-commodore-v6-v8-vt-vx-vu-vy-vz-ve-ls1-ls2-ls3-ls6-ls7-l98-l76-car-steering-tank-reservoir-can","title":"Power Steering Reservoir Billet Aluminium for Holden Commodore V6 V8 LS","description":"\u003cp\u003eAn aluminium power steering tank to replace the cracked plastic one on Commodores, or to tidy up an LS swap. Black or silver.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits Holden Commodore VT, VX, VU, VY, VZ, VE\u003c\/li\u003e\n\u003cli\u003eV6 and V8 including LS1, LS2, LS3\u003c\/li\u003e\n\u003cli\u003eAluminium tank\u003c\/li\u003e\n\u003cli\u003eBlack or silver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it fit my Commodore?\u003c\/strong\u003e\u003cbr\u003eIt is made to suit VT to VE Commodore and Ute models with V6 or V8. Check the photos and your hose layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fluid goes in a Commodore power steering?\u003c\/strong\u003e\u003cbr\u003eUse the power steering fluid listed in your owner manual.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628831998253,"sku":"1005007044282173-black","price":70.99,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":67628832031021,"sku":"1005007044282173-Silver","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Hb0310babd0f7463f844db1291c3e2e27Z.webp?v=1791714666"},{"product_id":"ls-oil-port-adapter-cooler-delete-block-off-plate-r5134-for-gm-ls-series-lsx-ls1-ls2-ls3-ls6-lq4-lq9-lm7-v8-engines-4-8l-1997-03","title":"LS Oil Cooler Port Block Off Plate R5134, Oil Cooler Delete for GM LS1 LS2 LS3 LS6 5.3 5.7 6.0","description":"\u003cp\u003eBlank off the factory oil cooler port on the side of a GM LS block when you are not running the oil cooler lines. A neat, leak-free way to tidy up an LS swap.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces GM R5134 style cover\u003c\/li\u003e\n\u003cli\u003eFits GM LS series: LS1, LS2, LS3, LS6, LQ4, LQ9, LM7 (4.8, 5.3, 5.7, 6.0)\u003c\/li\u003e\n\u003cli\u003eBolts on with o-ring seal\u003c\/li\u003e\n\u003cli\u003eSilver or black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I delete the oil cooler on an LS?\u003c\/strong\u003e\u003cbr\u003eYes, if you are not using the factory cooler or lines. This plate seals the port so oil stays in the block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit all LS engines?\u003c\/strong\u003e\u003cbr\u003eIt fits Gen 3 and most Gen 4 LS blocks that have the oil cooler port on the driver side. Check your block has the port before ordering.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67628856639789,"sku":"1005009250356283-Silver","price":25.99,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67628856672557,"sku":"1005009250356283-black","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sbd02f58c942b482c806db69942fa66c1W.webp?v=1791717266"},{"product_id":"block-off-plates-kit-ls-evap-valve-block-off-plates-kit-purge-solenoid-plug-intake-exhaust-5-3-6-0-lm7","title":"LS EVAP Purge Solenoid Block Off Plate Kit, Intake and Exhaust Block Off Plates for 5.3 6.0 LM7","description":"\u003cp\u003eA tidy kit of block off plates for LS swaps where the EVAP purge solenoid and other emissions ports are not being used. Seals the ports properly so there are no vacuum leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlanks the EVAP purge solenoid port\u003c\/li\u003e\n\u003cli\u003eIncludes plates for common intake and exhaust ports\u003c\/li\u003e\n\u003cli\u003eSuits truck LS such as 5.3, 6.0 and LM7\u003c\/li\u003e\n\u003cli\u003eSupplied with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does an EVAP block off plate do?\u003c\/strong\u003e\u003cbr\u003eIt seals the hole left when the EVAP purge solenoid is removed so the intake does not suck air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs deleting EVAP legal?\u003c\/strong\u003e\u003cbr\u003eFor off-road and race use. Check your state rules before removing emissions parts from a registered car.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67628856738093,"sku":"1005009897130825-Default Title","price":46.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sdea110106f64402f86946b6f617d82e1U.webp?v=1791717267"},{"product_id":"steam-port-delete-blanks-ls-cylinder-head-coolant-block-off-plate-set-ls-ls1","title":"LS Steam Port Delete Blanks, Cylinder Head Coolant Block Off Plates for LS1 LS6 LQ4 LQ9","description":"\u003cp\u003eBlank off the steam ports on the ends of LS cylinder heads when you are not running the steam vent crossover. Simple bolt-on plates for a clean engine bay.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet to suit both heads\u003c\/li\u003e\n\u003cli\u003eFits Gen 3 LS heads with the 2-bolt steam port\u003c\/li\u003e\n\u003cli\u003eGaskets \/ seals included\u003c\/li\u003e\n\u003cli\u003eAluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I delete the LS steam ports?\u003c\/strong\u003e\u003cbr\u003eMany people do on swaps, but on some engines and heads the steam ports help bleed air from the heads. If unsure, keep them connected to the radiator or throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these fit Gen 4 heads?\u003c\/strong\u003e\u003cbr\u003eThey suit the common 2-bolt LS steam port. Check your head bolt spacing before ordering.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67628856770861,"sku":"1005003002004898-Default Title","price":9.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/H99636edc55ed4a5497ff4de9178f86e6O.webp?v=1791717267"},{"product_id":"engine-blocks-billet-valley-pan-cover-plate-cover-plate-for-ls-gen-3-billet-aluminum-lsx-ls1-lm7-lr4-lq4-ls6-l59-lq9-lm4-l33","title":"LS Gen 3 Billet Valley Cover Plate, Knock Sensor Valley Pan Delete for LS1 LM7 LQ4 LQ9 LS6","description":"\u003cp\u003eReplace the plastic factory valley pan on a Gen 3 LS with a flat billet cover. Looks great under a custom intake and gives you a solid, sealed valley.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Gen 3 LS: LS1, LS6, LM7, LQ4, LQ9, L59, LM4, L33\u003c\/li\u003e\n\u003cli\u003eSilver or black finish\u003c\/li\u003e\n\u003cli\u003eBillet aluminium, flat plate design\u003c\/li\u003e\n\u003cli\u003eRe-use or relocate your knock sensors as needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo Gen 3 LS knock sensors sit under the valley cover?\u003c\/strong\u003e\u003cbr\u003eYes, on Gen 3 the knock sensors are in the valley. Make sure you plan where they will go, or use a valley cover designed for them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a Gen 4 LS?\u003c\/strong\u003e\u003cbr\u003eNo, this suits Gen 3 blocks only.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67628856803629,"sku":"1005008471288850-Silver","price":51.99,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67628856836397,"sku":"1005008471288850-black","price":51.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S1d05dfcb7ec649e4ba1215bfdc10b0db7.webp?v=1791717267"},{"product_id":"ls-engine-mounts-billet-aluminum-ls-swap-kit-ls-adapter-plates-kit-ls2-ls3-ls6-for-conversion-chevelle-camaro-nova","title":"LS Swap Engine Mount Adapter Plates, Billet LS1 LS2 LS3 LS6 to Small Block Chevy Mounts","description":"\u003cp\u003eAdapter plates that let a GM LS engine bolt onto old-school small block Chevy style frame mounts. The easy way to get an LS into a Chevelle, Camaro, Nova and many other conversions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS1, LS2, LS3, LS6 and other LS blocks\u003c\/li\u003e\n\u003cli\u003eAdapts LS block to SBC style mounts\u003c\/li\u003e\n\u003cli\u003eBillet aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo LS swap plates change engine position?\u003c\/strong\u003e\u003cbr\u003eAdapter plates usually move the engine slightly forward. Check fan, radiator and firewall clearance in your car.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need engine mounts?\u003c\/strong\u003e\u003cbr\u003eYes. These plates bolt to the block and then to your existing rubber or poly mounts.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67628856934701,"sku":"1005008147489783-Default Title","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/H069bdf05f11f4086934192a89452e081a.webp?v=1791717268"},{"product_id":"stainless-steel-1-8npt-oil-pressure-sensor-tee-adapter-m16x1-5-turbo-feed-line-gauge-fitting-connector-for-ls-engine-swap","title":"LS Oil Pressure Sensor Tee Adapter M16 x 1.5 to 1\/8\" NPT, Stainless, Gauge and Sender Fitting","description":"\u003cp\u003eScrews into the M16 x 1.5 oil pressure port on an LS engine and splits it so you can keep the factory sender and add a mechanical gauge, an aftermarket sender or a turbo oil feed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM16 x 1.5 male into the engine\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT female ports for sender and gauge\u003c\/li\u003e\n\u003cli\u003eSuits LS swaps and other M16 oil ports\u003c\/li\u003e\n\u003cli\u003eStainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread is the LS oil pressure sender?\u003c\/strong\u003e\u003cbr\u003eMost LS engines use M16 x 1.5. This tee suits that port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run a turbo oil feed from this?\u003c\/strong\u003e\u003cbr\u003eYes, many people use the spare 1\/8\" NPT port for a turbo feed line with a suitable AN adaptor.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"M16 x 1.5 to 1\/8\" NPT","offer_id":67628857688365,"sku":"1005008142266951-JXSS029-M1615","price":12.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sd847288284b745ea8082f8e3d94a2fe0e.webp?v=1791717270"},{"product_id":"6an-power-steering-hose-kit-fit-for-chevy-c10-ls-swap-connects-gm-type-2","title":"6AN Power Steering Hose Kit for Chevy C10 LS Swap, GM Type 2 Pump","description":"\u003cp\u003eA ready-made braided power steering line kit for the C10 LS swap. Joins the GM Type 2 pump to the steering box with proper AN6 fittings, so no hunting for adaptors.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAN6 braided hose with fittings\u003c\/li\u003e\n\u003cli\u003eSuits Chevy C10 with LS engine and GM Type 2 pump\u003c\/li\u003e\n\u003cli\u003ePressure and return lines\u003c\/li\u003e\n\u003cli\u003eStainless braided hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN6\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is a GM Type 2 power steering pump?\u003c\/strong\u003e\u003cbr\u003eThe pump used on many late model GM V8s, including most LS trucks and cars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit other trucks?\u003c\/strong\u003e\u003cbr\u003eIt is made for the C10 LS swap. Measure your layout before ordering for other vehicles.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Stainless braided hose with anodised aluminium AN fittings\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67628858016045,"sku":"1005008805887163-Silver","price":119.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S07923515a21a44b78bf14051dd5e34745.webp?v=1791719047"},{"product_id":"8pcs-silver-ls3-ls7-ls9-l76-aluminum-shorty-fuel-injector-adapter-spacer-to-ls2-intake-fuel-rail-fp-1102","title":"LS3 to LS2 Fuel Injector Adapters, 8 Pack Shorty Injector Spacers for LS1 LS2 LS6 Rails","description":"\u003cp\u003eWant to run modern LS3 style injectors on an older LS1, LS2 or LS6 intake? These spacers make up the height difference so the injectors seal properly in the rail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 8 adapters\u003c\/li\u003e\n\u003cli\u003eFor LS3, LS7, LS9, L76 style injectors in LS1, LS2, LS6 rails\u003c\/li\u003e\n\u003cli\u003eAluminium, silver\u003c\/li\u003e\n\u003cli\u003eUse with your new injector o-rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy use injector adapters on an LS?\u003c\/strong\u003e\u003cbr\u003eDifferent LS engines use different injector lengths. Adapters let you fit the injector you want without changing the rail or intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need new o-rings?\u003c\/strong\u003e\u003cbr\u003eUse fresh, lightly lubed o-rings when you fit injectors.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67628857950509,"sku":"1005010677701097-Silver","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S78589fff5e5c47a5a04b674776a27d15i.webp?v=1791719047"},{"product_id":"551371-8pc-fuel-injector-spacers-convert-ls1-fuel-injector-to-ls-truck-injector-silver-fp-1101","title":"LS1 to LS Truck Fuel Injector Spacers 551371, 8 Pack Injector Adapters","description":"\u003cp\u003eFit short LS1 style injectors into an LS truck intake and fuel rail. These spacers make up the extra height so the injectors seal properly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 8 spacers\u003c\/li\u003e\n\u003cli\u003eLS1 car style injectors into LS truck (4.8, 5.3, 6.0) intakes\u003c\/li\u003e\n\u003cli\u003eEquivalent to part 551371\u003c\/li\u003e\n\u003cli\u003eAluminium, silver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are LS truck injectors different?\u003c\/strong\u003e\u003cbr\u003eTruck intakes are taller, so they use longer injectors. Spacers let you run the shorter car injectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need new o-rings?\u003c\/strong\u003e\u003cbr\u003eYes, use fresh lightly lubed o-rings.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67628858048813,"sku":"1005010678103962-Silver","price":16.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S11b1ec10cfcc443ab1183f8612f550e7T.webp?v=1791719047"},{"product_id":"ls1-harmonic-balancer-installer-crank-puller-crankshaft-installation-tool-for-gm-1997-up-ls-lt-series-engines-gen-3-4-5","title":"LS Harmonic Balancer Installer Tool for GM LS and LT Engines Gen 3, 4, 5","description":"\u003cp\u003eLS balancers are a press fit, and the factory bolt is not long enough to pull them on. This installer presses the balancer on straight and safely without a hammer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits GM LS and LT engines, 1997 on (Gen 3, 4, 5)\u003c\/li\u003e\n\u003cli\u003eThreaded rod, bearing and nut\u003c\/li\u003e\n\u003cli\u003ePresses the balancer on straight\u003c\/li\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I install an LS balancer with the bolt?\u003c\/strong\u003e\u003cbr\u003eNot safely. The factory bolt is torque-to-yield and too short. Use an installer, then fit a new bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this remove the balancer?\u003c\/strong\u003e\u003cbr\u003eNo, it installs it. Use a puller to remove.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from hardened steel\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628858179885,"sku":"1005007030455558-black","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S60072f6e967b4d41af2e71988ae685b4E.webp?v=1791719047"},{"product_id":"for-ls1-ls2-ls3-ls6-ls7-or-similar-soils-with-72mm-bolt-spacing-ls-cast-aluminum-tall-valve-covers-w-coil-mounts","title":"LS Tall Valve Covers with Coil Mounts, Cast Aluminium for LS1 LS2 LS3 LS6 LS7","description":"\u003cp\u003eTall valve covers that give extra room for aftermarket rockers and look the part on an LS swap. Coil mounts are built in, so the coils bolt straight on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS1, LS2, LS3, LS6, LS7 with 72 mm coil bolt spacing\u003c\/li\u003e\n\u003cli\u003eTall design for roller rocker clearance\u003c\/li\u003e\n\u003cli\u003eBuilt-in coil pack mounts\u003c\/li\u003e\n\u003cli\u003eBlack or silver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need tall valve covers?\u003c\/strong\u003e\u003cbr\u003eIf you run aftermarket roller rockers or a high lift cam, factory covers can hit the rockers. Tall covers give you room.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre gaskets included?\u003c\/strong\u003e\u003cbr\u003eReuse good factory gaskets or fit new ones.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from cast aluminium\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67628859195693,"sku":"1005010022981922-black","price":185.99,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":67628859228461,"sku":"1005010022981922-Silver","price":185.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S4e2e468b11c7484294ea81be6eca705b8.webp?v=1791719047"},{"product_id":"ls-cylinder-head-coolant-steam-port-crossover-throttle-body-bypass-hose-kit-for-gm-serie-ls1-lsx-lm7-lr4-lq4-ls6-l59-lq9-lm4-l33","title":"LS Steam Port Crossover Hose Kit, Throttle Body Bypass Coolant Hose for GM LS1 LS6 LQ4 LQ9","description":"\u003cp\u003eTidy up the LS steam port crossover and bypass the throttle body coolant passage. Links the steam ports on both heads into one outlet to run to the radiator or water pump.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits GM LS: LS1, LS6, LM7, LR4, LQ4, LQ9, L59, LM4, L33\u003c\/li\u003e\n\u003cli\u003eSteam port crossover with outlet\u003c\/li\u003e\n\u003cli\u003eThrottle body coolant bypass\u003c\/li\u003e\n\u003cli\u003eAluminium fittings with hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy keep the LS steam ports?\u003c\/strong\u003e\u003cbr\u003eThey let trapped air escape from the heads, which helps avoid hot spots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the steam line go?\u003c\/strong\u003e\u003cbr\u003eUsually to the top of the radiator or into the water pump inlet.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"White \/ China Mainland","offer_id":67628862898477,"sku":"4000114918115-WHITE-China Mainland","price":27.99,"currency_code":"AUD","in_stock":true},{"title":"Black \/ China Mainland","offer_id":67628862931245,"sku":"4000114918115-black-China Mainland","price":26.99,"currency_code":"AUD","in_stock":true},{"title":"Grey \/ China Mainland","offer_id":67628862964013,"sku":"4000114918115-GRAY-China Mainland","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/H40383886119e4a8c8ef5eefa27c24d8cw.webp?v=1791724216"},{"product_id":"an10-male-to-3-4-hose-barb-valve-cover-port-adapter-aluminum-pcv-fitting-with-rubber-grommet-for-gm-ls-engine-swap","title":"LS Valve Cover PCV Adapter AN10 to 3\/4\" Hose Barb with Grommet, GM LS Swap","description":"\u003cp\u003ePlug into the LS valve cover breather hole and run your catch can or breather with AN10 or 3\/4\" hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the LS valve cover breather grommet hole\u003c\/li\u003e\n\u003cli\u003eAN10 male one end, 3\/4\" barb the other\u003c\/li\u003e\n\u003cli\u003eRubber grommet included\u003c\/li\u003e\n\u003cli\u003eAluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN10\u003c\/td\u003e\n\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003ctd\u003e7\/8\"-14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is this used for?\u003c\/strong\u003e\u003cbr\u003eRouting LS valve cover breathers to a catch can with AN or rubber hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit other valve covers?\u003c\/strong\u003e\u003cbr\u003eIt suits covers with the standard LS breather grommet hole.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China from aluminium alloy with an anodised finish\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"AN10 to 3\/4\" Barb","offer_id":67631542403373,"sku":"1005010231744115-AN10-3-4Hose","price":24.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S931eed51c6ef44e5acdfa0f872f0dd32v.webp?v=1791763692"},{"product_id":"ls-throttle-body-adapter-ls1-3-bolt-intake-manifold-to-ls3-4-bolt-throttle-body-dbc-lm7-lr4-lq4-ls6-l59-lq9-lm4-l33-lsx-551513","title":"LS Throttle Body Adapter, 3 Bolt Intake to 4 Bolt LS3 Throttle Body for LS1 LS6 LQ4","description":"\u003cp\u003eRun a larger 4 bolt LS3 style drive-by-cable throttle body on an early 3 bolt LS intake manifold. Simple bolt-on upgrade.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 bolt LS1 \/ LS6 \/ truck intake to 4 bolt LS3 throttle body\u003c\/li\u003e\n\u003cli\u003eSuits LM7, LR4, LQ4, LQ9, LS6, L59, LM4, L33\u003c\/li\u003e\n\u003cli\u003eSilver or black\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need a tune after fitting a bigger throttle body?\u003c\/strong\u003e\u003cbr\u003eUsually a quick tune is recommended for best idle and drivability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit drive-by-wire?\u003c\/strong\u003e\u003cbr\u003eIt adapts the bolt pattern. Check your throttle body type and pedal setup.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China, CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67631542468909,"sku":"1005008143851057-Silver","price":60.99,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67631542501677,"sku":"1005008143851057-black","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S55b7afe6e0f143b0ba04d1abfbbd8c5bq.webp?v=1791761667"},{"product_id":"oem-10299146-for-c5-corvette-fuel-pressure-regulator-filter-6an-accessory-efi-ls-exchange-58psi","title":"C5 Corvette Fuel Filter Regulator with 6AN Fittings, 58 psi for LS Swap EFI","description":"\u003cp\u003eThe classic LS swap fuel trick: a C5 Corvette filter regulator. It filters the fuel and sets 58 psi, with a return to the tank, so you can run a simple single line to the engine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLike OEM 10299146\u003c\/li\u003e\n\u003cli\u003eFixed 58 psi, perfect for LS EFI\u003c\/li\u003e\n\u003cli\u003eFilter and regulator in one\u003c\/li\u003e\n\u003cli\u003e6AN fittings included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN6\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does a Corvette filter regulator work?\u003c\/strong\u003e\u003cbr\u003eFuel goes in from the pump, filtered fuel at 58 psi goes out to the engine, and extra fuel returns to the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should it be mounted?\u003c\/strong\u003e\u003cbr\u003eNear the tank or on the chassis rail, with the return line going straight back to the tank.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Steel filter body with aluminium AN fittings\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67631542567213,"sku":"1005009288220720-Default Title","price":81.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sfdd1fec4ab064f349f2fbd32aabd2e70M.webp?v=1791763692"},{"product_id":"rastp-universal-6an-power-steering-pump-hose-kit-25inch-for-gm-ls-swap-pressure-return-line-hr070","title":"6AN Power Steering Hose Kit 25\", Pressure and Return Lines for GM LS Swap, RASTP","description":"\u003cp\u003eA universal 6AN power steering line kit for LS swaps. Pressure and return lines with fittings, about 25 inches long.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6AN braided hose\u003c\/li\u003e\n\u003cli\u003ePressure and return lines\u003c\/li\u003e\n\u003cli\u003eAbout 25\" (635 mm) length\u003c\/li\u003e\n\u003cli\u003eFittings included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAN size chart\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube \/ hose size\u003c\/th\u003e\n\u003cth\u003eApprox. mm\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAN6\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill this suit any LS swap?\u003c\/strong\u003e\u003cbr\u003eIt is universal. Measure your pump to rack or box distance before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use PTFE hose for power steering?\u003c\/strong\u003e\u003cbr\u003eBraided rubber or PTFE both work. This kit uses braided hose suited to power steering.\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Braided hose with anodised aluminium fittings\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67631542632749,"sku":"1005010690720672-black","price":50.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S127bf1dd06ae4722bf25a7ca447213e0T.webp?v=1791761668"},{"product_id":"oil-feed-line-adapter-plate-m16-x-1-5-1-8npt-2-ports-for-ls-replacement","title":"LS Oil Feed Adapter Plate, M16 x 1.5 with Two 1\/8\" NPT Ports for Turbo Feed and Gauges","description":"\u003cp\u003eNeed a clean oil supply on an LS for a turbo feed line, a gauge or an extra sender? This billet plate bolts on in place of the factory cover and gives you two 1\/8\" NPT ports straight off the block.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo 1\/8\" NPT ports for oil feed lines, gauges or senders\u003c\/li\u003e\n\u003cli\u003eM16 x 1.5 port to suit the factory LS sender thread\u003c\/li\u003e\n\u003cli\u003eSupplied with O-ring seal and mounting bolts\u003c\/li\u003e\n\u003cli\u003eSuits Gen III and Gen IV LS engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I run a turbo oil feed from this plate?\u003c\/strong\u003e\u003cbr\u003eYes. Most blokes run a -4AN line from one port with a 1\/8\" NPT to -4AN adapter, and keep the other for a gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need thread sealant on the NPT fittings?\u003c\/strong\u003e\u003cbr\u003eYes. Use a good liquid thread sealant on tapered NPT threads. Don't use tape that can shred into the oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: chuck a quick oil pressure test on before and after you plumb the turbo feed. Cheap peace of mind.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636561969453,"sku":"1005008936826740-Default Title","price":47.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S108ca465e6db43789975b092a5e0a644e.webp?v=1791867346"},{"product_id":"for-ls-2-75-diameter-6-groove-tensioner-pulley-for-chevrolet-corvette-5-7l-350-v8-1997-2004","title":"LS Idler Tensioner Pulley 2.75\", 6 Groove for Corvette C5 5.7 LS1 1997 to 2004","description":"\u003cp\u003eReplacement 2.75\" six groove tensioner pulley for LS engines. Handy for C5 Corvette accessory drives and custom LS belt setups where you need a smooth idler.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2.75\" diameter, 6 groove serpentine profile\u003c\/li\u003e\n\u003cli\u003eSealed bearing, ready to bolt on\u003c\/li\u003e\n\u003cli\u003eSuits C5 Corvette 5.7 LS1 1997 to 2004 and similar LS drives\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill this suit a smooth idler position?\u003c\/strong\u003e\u003cbr\u003eThis is a grooved pulley for the ribbed side of the belt. For the back of the belt use a smooth idler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a new belt?\u003c\/strong\u003e\u003cbr\u003eNot usually, but if the old belt is glazed or cracked it's cheap insurance to fit a new one.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eGive the old pulley a spin by hand before you rip it off. If it growls or wobbles, it's cactus and this'll sort it.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562034989,"sku":"1005009572193150-China Mainland","price":73.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S05a7403063404393baa8a8fe2a53ea52x.webp?v=1791868651"},{"product_id":"for-ls1-power-steering-pump-pulley-for-camaro-for-firebird-98-02-v8-ls1-engine-replace-for-12559885","title":"LS1 Power Steering Pump Pulley for Camaro and Firebird 1998 to 2002, Replaces 12559885","description":"\u003cp\u003eA billet replacement power steering pump pulley for the LS1 F-body. Great for a fresh rebuild or an LS swap using the F-body accessory drive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits 1998 to 2002 Camaro and Firebird LS1\u003c\/li\u003e\n\u003cli\u003eReplaces GM part 12559885\u003c\/li\u003e\n\u003cli\u003ePress-on fit, same as factory\u003c\/li\u003e\n\u003cli\u003eBlack anodised billet finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need a puller to fit it?\u003c\/strong\u003e\u003cbr\u003eYes. Use a power steering pulley remover and installer tool, don't hammer it on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it suit a Commodore LS1?\u003c\/strong\u003e\u003cbr\u003eVT to VZ Commodores use a different drive layout. Check your pump shaft and belt line before ordering.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTired old pulley on your F-body? Bolt-on fix, no dramas.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562100525,"sku":"1005009588437044-China Mainland","price":105.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sd99500f38a864d47a47fef1d29b276fcC.webp?v=1791867347"},{"product_id":"for-ls1-manual-belt-tensioner-w-pulley-for-1998-02-camaro-z28-ss-firebird-formula-trans-am-ws6-ls-ls2-gto","title":"LS1 Manual Belt Tensioner with Pulley for F-Body Camaro, Firebird and GTO","description":"\u003cp\u003eDitch the factory spring tensioner and run a solid, adjustable manual tensioner. Popular for high-rpm builds and LS swaps where you want the belt to stay put.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManual (screw adjust) belt tensioner with pulley\u003c\/li\u003e\n\u003cli\u003eSuits 1998 to 2002 Camaro Z28, SS, Firebird Formula, Trans Am, WS6\u003c\/li\u003e\n\u003cli\u003eAlso suits LS2 GTO drives\u003c\/li\u003e\n\u003cli\u003eBillet arm with sealed bearing pulley\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow tight should the belt be?\u003c\/strong\u003e\u003cbr\u003eFirm with about 10 to 12 mm deflection on the longest run. Too tight will kill bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this better than the spring tensioner?\u003c\/strong\u003e\u003cbr\u003eFor racing and high rpm, yes. For a daily, the factory tensioner is fine if it's in good nick.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks Performance tip: a manual tensioner suits the builds that cop a flogging. Set it once and forget it.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562133293,"sku":"1005009584177518-China Mainland","price":131.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S2812576217d943ce862b909319d1f10fp.webp?v=1791867347"},{"product_id":"for-ls-high-mount-alternator-only-bracket-for-ls-4-8l-5-3l-6-0l-6-2l-v8-engine-for-truck-suv-1999-13-camaro-2010-15-crank-pulley","title":"LS High Mount Alternator Bracket for Truck 4.8 5.3 6.0 6.2 and Camaro 2010 to 2015","description":"\u003cp\u003eMove the alternator up high on your LS. Great for swaps where the factory low position hits the chassis rail, steering box or sump.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh mount alternator only bracket\u003c\/li\u003e\n\u003cli\u003eSuits LS truck engines 1999 to 2013 (4.8, 5.3, 6.0, 6.2) and 2010 to 2015 Camaro\u003c\/li\u003e\n\u003cli\u003eBillet construction with hardware\u003c\/li\u003e\n\u003cli\u003eWorks with factory style crank pulley spacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the alternator?\u003c\/strong\u003e\u003cbr\u003eNo, it's the bracket kit only. It suits a standard GM LS alternator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it clear my bonnet?\u003c\/strong\u003e\u003cbr\u003eIt sits higher than factory, so check clearance on low bonnet hot rods before ordering.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: mock everything up with the belt on before you lock it all down. Saves a lot of swearing later.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562362669,"sku":"1005009560502276-1 set-China Mainland","price":296.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S8322a580030d425eb8084032577cea7dD.webp?v=1791867349"},{"product_id":"12610792-power-steering-bracket-kit-aluminum-billet-for-2010-2011-2012-chevrolet-chevy-camaro-6-2l-v8-ls3-l99","title":"LS3 Power Steering Pump Bracket 12610792 for Camaro 2010 to 2012 6.2 LS3 and L99","description":"\u003cp\u003eA billet replacement for GM bracket 12610792. Used on the 5th gen Camaro LS3 and L99, and handy for LS swaps using the Camaro accessory layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces GM 12610792\u003c\/li\u003e\n\u003cli\u003eSuits 2010 to 2012 Camaro 6.2 LS3 and L99\u003c\/li\u003e\n\u003cli\u003eBillet aluminium bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit the Camaro accessory drive in a swap?\u003c\/strong\u003e\u003cbr\u003eYes, if you're running the 5th gen Camaro pump and pulley spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pump included?\u003c\/strong\u003e\u003cbr\u003eNo, bracket only.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eHandy one to have on the shelf if you're running the Camaro drive on a swap. Tucks Performance has you covered.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562493741,"sku":"1005012000647834-For GM 12610792","price":100.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S64e0a8ac540c46228203437652b92326X.webp?v=1791868650"},{"product_id":"ls1-swap-throttle-cable-bracket-for-lokar-cable-for-chevy-corvette-camaro-pontiac-firebird","title":"LS1 Throttle Cable Bracket for Lokar Cable, Corvette, Camaro and Firebird LS Swap","description":"\u003cp\u003eHook a Lokar style throttle cable up to your LS1 intake the neat way. A simple billet bracket for drive-by-cable LS swaps.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS1 style intakes and cable throttle bodies\u003c\/li\u003e\n\u003cli\u003eMade for Lokar and similar throttle cables\u003c\/li\u003e\n\u003cli\u003eSuits Corvette, Camaro, Firebird and LS swaps\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this suit a drive-by-wire throttle body?\u003c\/strong\u003e\u003cbr\u003eNo. It's for cable (DBC) throttle bodies only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it suit a factory GM cable?\u003c\/strong\u003e\u003cbr\u003eIt's made for the Lokar style cable end. Factory cables may need a different bracket.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCable throttle keeps the swap simple. Less wiring, less tuning, more driving.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562559277,"sku":"1005009529722259-Default Title","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sc34938cc170b4ccdb430344e9031fb2b4.webp?v=1791867350"},{"product_id":"aluminum-throttle-cable-bracket-for-ls1-sheet-metal-intake-manifold-new","title":"LS1 Throttle Cable Bracket for Sheet Metal Intake Manifolds, Billet Aluminium","description":"\u003cp\u003eRunning a fabricated sheet metal intake on your LS? This billet bracket gives your throttle cable a solid, neat mounting point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS1 sheet metal intake manifolds\u003c\/li\u003e\n\u003cli\u003eFor cable (DBC) throttle bodies\u003c\/li\u003e\n\u003cli\u003eBillet aluminium, silver finish\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it suit a factory plastic intake?\u003c\/strong\u003e\u003cbr\u003eIt's made for sheet metal intakes. Factory intakes have their own bracket options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run a cruise cable too?\u003c\/strong\u003e\u003cbr\u003eIt's a single cable bracket. Most performance builds run throttle only.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBuilt for blokes running a sheet metal intake who want it looking tidy and working right.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562624813,"sku":"1005008127187343-Silver","price":76.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S844570c84cad4942b3d85d8917773b21y.webp?v=1791868650"},{"product_id":"5-3l-ls-square-coil-brackets-valve-cover-d581-d514a-d510c-12558693-lsx-swap-truck-ls1-ls3-ls2-lq4-lq9-ls6-l92-l99-l33-lr4","title":"LS Square Coil Relocation Brackets for Truck D581 Coils, LS1 LS2 LS3 LQ4 LQ9 L92","description":"\u003cp\u003eRun the cheap, reliable square truck coils on any LS. These brackets mount D581 style coils neatly on the valve covers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits square coils D581, D514A, D510C, 12558693\u003c\/li\u003e\n\u003cli\u003eFits LS1, LS2, LS3, LQ4, LQ9, LS6, L92, L99, L33, LR4\u003c\/li\u003e\n\u003cli\u003eSilver or black finish\u003c\/li\u003e\n\u003cli\u003ePair of brackets with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy use truck coils?\u003c\/strong\u003e\u003cbr\u003eThey're tough, cheap to replace and easy to find. A lot of LS builds use them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need different plug leads?\u003c\/strong\u003e\u003cbr\u003eYou may need longer leads depending on where the coils end up.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTruck coils are about as bulletproof as it gets. Ask any LS bloke.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Silver","offer_id":67636562690349,"sku":"1005010338289010-Silver","price":66.99,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67636562723117,"sku":"1005010338289010-black","price":66.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S957485ba5b6d4b9ba8f6674d4255dce6W.webp?v=1791867351"},{"product_id":"an4-adapter-engine-steam-vent-hose-line-kit-stainless-steel-braided-line-hose-for-ls-lsx-ls1-ls2-ls6-lm7-chevrolet-pontiac-gmc","title":"LS Steam Vent Hose Kit -4AN, Stainless Braided Coolant Crossover for LS1 LS2 LS6 LM7","description":"\u003cp\u003eEvery LS needs the steam ports connected, otherwise air pockets in the heads cause hot spots. This -4AN braided kit links the front and rear steam ports neatly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-4AN stainless braided lines with fittings\u003c\/li\u003e\n\u003cli\u003eSuits LS1, LS2, LS6, LM7 and LSX\u003c\/li\u003e\n\u003cli\u003eConnects all four head steam ports\u003c\/li\u003e\n\u003cli\u003eRoute back to the radiator or header tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to run the steam vents on an LS swap?\u003c\/strong\u003e\u003cbr\u003eYes. Skipping them is a common cause of hot spots and cracked heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the line go?\u003c\/strong\u003e\u003cbr\u003eUsually to the top of the radiator inlet side or a header tank, above the engine's highest point.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: don't skip the steam lines on a swap. It's a ten minute job that saves a set of heads.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Stainless steel braided hose with anodised aluminium fittings\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562788653,"sku":"1005008556574653-Default Title","price":94.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S35545b7624644c61993192288b4909b3w.webp?v=1791867352"},{"product_id":"steam-4-port-crossover-hose-kits-coolant-crossover-hose-kit-easy-install-flexible-heat-resistant-for-ls-series-engine","title":"LS 4 Port Steam Crossover Hose Kit, Flexible Heat Resistant Coolant Vent Kit","description":"\u003cp\u003eA complete steam crossover kit that ties all four LS head steam ports together and gives you one outlet to vent back to the radiator.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJoins all four LS head steam ports\u003c\/li\u003e\n\u003cli\u003eFlexible heat resistant lines\u003c\/li\u003e\n\u003cli\u003eFittings and hardware included\u003c\/li\u003e\n\u003cli\u003eSuits most LS truck and car engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the LS need steam vents?\u003c\/strong\u003e\u003cbr\u003eAir collects in the heads. The steam ports bleed it off so the heads don't hot spot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct bolt-on?\u003c\/strong\u003e\u003cbr\u003eYes for most LS heads. Check intake and throttle body clearance on custom set-ups.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eEverything in the box to do the job properly. No running back to the shop for bits.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Heat resistant hose with aluminium fittings\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636562952493,"sku":"1005012367589632-Default Title","price":147.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Scd06972afd334f2dae03557e663c949ax.webp?v=1791867353"},{"product_id":"for-ls-series-engines-4-8-5-3-5-7-6-0-ls1-ls2-ls3-ls6-front-and-rear-cover-billet-alignment-tool-oil-pan-alignment-tool-fits","title":"LS Front and Rear Cover Alignment Tool and Oil Pan Alignment Tool, Billet for 4.8 5.3 5.7 6.0","description":"\u003cp\u003eCentre the front and rear covers properly so the crank seals don't leak. A must-have in the toolbox if you're building LS engines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront cover, rear cover and oil pan alignment tools\u003c\/li\u003e\n\u003cli\u003eSuits LS 4.8, 5.3, 5.7, 6.0 and LS1, LS2, LS3, LS6\u003c\/li\u003e\n\u003cli\u003eBillet aluminium, reusable\u003c\/li\u003e\n\u003cli\u003eStops seal leaks from off-centre covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I really need an alignment tool?\u003c\/strong\u003e\u003cbr\u003eIf the cover isn't centred on the crank the seal wears on one side and leaks. This tool takes the guesswork out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit the Gen V LT?\u003c\/strong\u003e\u003cbr\u003eNo, this one is for Gen III and IV LS engines.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eIf you're building LS motors in the shed, this belongs in the toolbox. Tucks Performance reckons it pays for itself the first time it saves a leaky seal.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563018029,"sku":"1005008319981580-Default Title","price":81.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sb7932a79c47e47cc9bfa7e4c3c6b5b415.webp?v=1791867353"},{"product_id":"new-ls1-billet-oil-pump-pickup-tube-brace-girdle-brace-hold-down-for-gen-iii-iv-ls1-ls2-ls3-ls6-corvette-trans","title":"LS Oil Pump Pickup Tube Brace, Billet Pickup Girdle Hold Down for LS1 LS2 LS3 LS6","description":"\u003cp\u003eA loose pickup tube sucks air and starves the bearings. This little billet brace holds the pickup firmly to the windage tray stud. Cheap insurance on any LS build.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits Gen III and IV LS1, LS2, LS3, LS6\u003c\/li\u003e\n\u003cli\u003eBillet aluminium brace\u003c\/li\u003e\n\u003cli\u003eHolds the pickup tube secure under high rpm and vibration\u003c\/li\u003e\n\u003cli\u003eFit during sump install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need one on a stock engine?\u003c\/strong\u003e\u003cbr\u003eIt's cheap insurance, especially on high rpm or swapped engines with aftermarket sumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it suit my sump?\u003c\/strong\u003e\u003cbr\u003eCheck clearance with aftermarket swap sumps, most are fine.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCheap insurance, plain and simple. Fit one while the sump's off.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563116333,"sku":"4000307099920-Default Title","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/H47094449a26d484d88ce46617bc19109p.webp?v=1791868651"},{"product_id":"ls-cathedral-port-cylinder-head-intake-manifold-adapter-for-ls3-lsa-zl1-cts-v-engine-551316","title":"LS Cathedral Port Head to LS3 Intake Adapter 551316, Run LS3 LSA ZL1 Intakes on Cathedral Heads","description":"\u003cp\u003eWant to bolt an LS3 or LSA supercharger intake onto a cathedral port engine? These adapters let you run a rectangle port intake on cathedral heads.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdapts rectangle port (LS3, LSA, ZL1, CTS-V) intakes to cathedral port heads\u003c\/li\u003e\n\u003cli\u003eReplaces 551316\u003c\/li\u003e\n\u003cli\u003eBolts and seals included\u003c\/li\u003e\n\u003cli\u003eSuits LS1, LS6, 4.8, 5.3, 5.7, 6.0 cathedral heads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it lose power compared to rectangle port heads?\u003c\/strong\u003e\u003cbr\u003eThere's some flow loss, but it's a cheap way to run a better intake or a blower on a junkyard engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need longer intake bolts?\u003c\/strong\u003e\u003cbr\u003eBolts to suit are included in the kit.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eA cheap way to get a cracking intake onto a junkyard 5.3. Good bang for your buck.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563214637,"sku":"1005012169359333-Default Title","price":155.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S39d53340f2e245abb13670da26815e21L.webp?v=1791868650"},{"product_id":"artudatech-billet-oil-pressure-sensor-relocation-adapter-for-ls-lq-l92-l99-l33-lr4","title":"LS Oil Pressure Sensor Relocation Adapter, Billet for LS LQ L92 L99 L33 LR4","description":"\u003cp\u003eThe factory LS oil pressure sensor sits right at the back of the block and often hits the firewall in a swap. This billet adapter moves it out of harm's way.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelocates the factory LS oil pressure sensor\u003c\/li\u003e\n\u003cli\u003eSuits LS, LQ, L92, L99, L33, LR4\u003c\/li\u003e\n\u003cli\u003eBillet aluminium with O-ring seal\u003c\/li\u003e\n\u003cli\u003eGreat for tight firewall clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my factory sensor plug straight in?\u003c\/strong\u003e\u003cbr\u003eYes, it reuses the factory sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy relocate it?\u003c\/strong\u003e\u003cbr\u003eOn many LS swaps the sensor hits the firewall or gets damaged. Moving it saves headaches.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: put a dab of thread sealant on the fittings and torque it up gentle. Alloy threads don't like being belted.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563312941,"sku":"1005007273032631-Default Title","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S299c9e0c702e47518abbabf74a6a911eF.webp?v=1791867355"},{"product_id":"for-ls-valve-spring-compressor-installation-tool-for-ls1-ls2-for-cathedral-port-cylinder-head-style","title":"LS Valve Spring Compressor Tool for Cathedral Port Heads, LS1 LS2 LS6","description":"\u003cp\u003eSwap valve springs on an LS without pulling the heads. Bolts to the rocker stand and levers the spring down so you can pull the keepers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits LS cathedral port heads (LS1, LS2, LS6 and truck 4.8, 5.3, 6.0)\u003c\/li\u003e\n\u003cli\u003eWorks with heads on the engine\u003c\/li\u003e\n\u003cli\u003eRed, blue or black\u003c\/li\u003e\n\u003cli\u003eIdeal for cam swaps and spring upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to hold the valve up?\u003c\/strong\u003e\u003cbr\u003eYes. Put the cylinder at TDC and use air in the cylinder or rope to stop the valve dropping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit LS3 rectangle port heads?\u003c\/strong\u003e\u003cbr\u003eThis one is for cathedral port heads.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSaves pulling the heads for a spring swap. That's a weekend job turned into an arvo.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Red","offer_id":67636563411245,"sku":"1005006136684738-Red","price":42.99,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":67636563444013,"sku":"1005006136684738-Blue","price":42.99,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67636563476781,"sku":"1005006136684738-Black","price":42.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/H77384f49ab9a48448e1c810f8c0aaaaf3.webp?v=1791867356"},{"product_id":"oil-pump-alignment-tool-gen-v-lt1-lt4-oil-pump-alignment-plates-guide-tool-compatible-with-gen-v-lt1-lt4-lt5-l83-l86-l87-engines","title":"Gen V LT Oil Pump Alignment Tool for LT1 LT4 LT5 L83 L86 L87","description":"\u003cp\u003eCentre the oil pump properly on a Gen V LT engine. An off-centre pump wears fast and can lose pressure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits Gen V LT1, LT4, LT5, L83, L86, L87\u003c\/li\u003e\n\u003cli\u003eCentres the oil pump on the crank snout\u003c\/li\u003e\n\u003cli\u003eBlack or red anodised\u003c\/li\u003e\n\u003cli\u003eReusable billet tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit the older LS engines?\u003c\/strong\u003e\u003cbr\u003eNo, this is for Gen V LT engines only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy align the oil pump?\u003c\/strong\u003e\u003cbr\u003eAn off-centre pump binds and wears the gears. Aligning it gives you full pressure and long life.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSmall tool, big difference. Do it right the first time.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Black","offer_id":67636563542317,"sku":"1005007408107334-black","price":72.99,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67636563575085,"sku":"1005007408107334-Red","price":72.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S069ad05810d84598a3e9f5e26c672ceaM.webp?v=1791867356"},{"product_id":"36-braided-throttle-cable-kit-compatible-with-97-07-chevrolet-chevy-ls1-engine-4-8l-5-3l-5-7l-6-0l","title":"LS1 Braided Throttle Cable 36\" for 4.8 5.3 5.7 6.0 LS Swap","description":"\u003cp\u003eA 36\" braided throttle cable for drive-by-cable LS throttle bodies. Neat, smooth and made for swaps.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e36\" (914 mm) length\u003c\/li\u003e\n\u003cli\u003eStainless braided outer\u003c\/li\u003e\n\u003cli\u003eSuits LS1, 4.8, 5.3, 5.7, 6.0 cable throttle bodies\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it suit my pedal?\u003c\/strong\u003e\u003cbr\u003eIt suits most GM style pedals. Check the pedal end on custom set-ups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 36\" long enough?\u003c\/strong\u003e\u003cbr\u003eFor most engine bay layouts, yes. Measure your run before ordering.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: route it with smooth bends and no tight kinks so the throttle snaps back nice and clean.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Stainless braided outer with steel inner cable\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563640621,"sku":"1005004207293067-Default Title","price":42.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S07b1d37ca8bd45bf925967bd7bc5693el.webp?v=1791867357"},{"product_id":"new-high-quality-intake-manifold-silver-ls1-throttle-aluminum-cable-bracket-adjustable-for-244mm-sheet-metal","title":"LS1 Throttle Cable Bracket, Adjustable for 244 mm Sheet Metal Intake Manifolds","description":"\u003cp\u003eAn adjustable cable bracket for 244 mm sheet metal LS intakes. Set the cable angle just right.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits 244 mm sheet metal intake manifolds\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting position\u003c\/li\u003e\n\u003cli\u003eFor cable (DBC) throttle bodies\u003c\/li\u003e\n\u003cli\u003eSilver finish with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if it suits my intake?\u003c\/strong\u003e\u003cbr\u003eMeasure the mounting length on your intake. It's made for the 244 mm style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit drive-by-wire?\u003c\/strong\u003e\u003cbr\u003eNo, it's for cable throttle bodies.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBuilt for the blokes running a fabricated intake who want the throttle feeling right.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563706157,"sku":"1005004421126608-Silver-CN","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S6669773a96324f919690295b0eba525aN.webp?v=1791868650"},{"product_id":"knock-sensor-and-hardnesses-relocation-bracket-kit-for-gm-ls-gen-iii-engines-ls1-lm7-lr4-lq4-ls6-l59-lq9-lm4-551216-kn30","title":"LS Knock Sensor Relocation Bracket Kit 551216, Gen III LS1 LM7 LR4 LQ4 LS6 L59 LQ9","description":"\u003cp\u003eGen III knock sensors live under the intake. When they die you pull the intake. This kit moves them to the side of the block where they're easy to get at.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits Gen III LS1, LM7, LR4, LQ4, LS6, L59, LQ9, LM4\u003c\/li\u003e\n\u003cli\u003eReplaces 551216\u003c\/li\u003e\n\u003cli\u003eBrackets and bolts included\u003c\/li\u003e\n\u003cli\u003ePairs nicely with a valley cover delete plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need a different harness?\u003c\/strong\u003e\u003cbr\u003eYou may need to extend the knock sensor wiring. Most kits are a simple extension job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it suit Gen IV?\u003c\/strong\u003e\u003cbr\u003eGen IV sensors are already on the block sides, so you won't need it.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eMoving the knock sensors out is one of those jobs you'll thank yourself for down the track.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563771693,"sku":"1005008262480338-Silver-China Mainland","price":58.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S086ce2e1aaa74891b58bbbdca7c507ccJ.webp?v=1791868650"},{"product_id":"for-ls-truck-low-mount-alternator-bracket-w-pulley-kit-for-lsx-for-chevrolet-camaro-1998-2002","title":"LS Truck Low Mount Alternator Bracket with Pulley Kit for F-Body Camaro 1998 to 2002","description":"\u003cp\u003eDrop the alternator down low for bonnet clearance and a clean engine bay. A complete bracket and idler kit for LS swaps.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow mount alternator bracket with idler pulley\u003c\/li\u003e\n\u003cli\u003eSuits LS truck engines and 1998 to 2002 F-body Camaro drives\u003c\/li\u003e\n\u003cli\u003eBillet construction\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it clear my steering box?\u003c\/strong\u003e\u003cbr\u003eLow mount can be tight in some chassis. Check clearance around the steering box and chassis rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit a truck water pump?\u003c\/strong\u003e\u003cbr\u003eYes, it's designed around LS truck accessory spacing.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eLow mount keeps the bonnet line clean on lowered stuff. Tucks Performance tip: check your rail clearance first.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563837229,"sku":"1005009553184067-China Mainland","price":138.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S96e59d082ada423f981f74b025861bbas.webp?v=1791868655"},{"product_id":"artudatech-7-water-pump-spacer-adapter-swap-kit-for-lsx-ls-ls3-lq4-ls1-camaro-to-truck-car-accessories","title":"LS Water Pump Spacer Kit 7\", Convert Car and Truck Accessory Spacing for LS1 LS3 LQ4","description":"\u003cp\u003eMix and match LS accessory drives. This spacer kit lets you run a different water pump spacing so your pulleys line up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWater pump spacer adapter kit\u003c\/li\u003e\n\u003cli\u003eSuits LS1, LS3, LQ4, LSX swaps\u003c\/li\u003e\n\u003cli\u003eGaskets and long bolts included\u003c\/li\u003e\n\u003cli\u003eHelps line up car and truck accessory drives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my belt line up?\u003c\/strong\u003e\u003cbr\u003eThe kit is made to correct pump spacing. Always check every pulley lines up before running it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need new gaskets?\u003c\/strong\u003e\u003cbr\u003eGaskets are included.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eMix and match bits from the wreckers and still get the belts lining up. Good stuff.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563902765,"sku":"1005008542743935-Silver","price":75.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S64a1cc023fa54855a099eab4caa6d2c0n.webp?v=1791868651"},{"product_id":"suitable-for-ls-electric-water-pump-adapter-plate-convert-fit-bbc-pump-to-ls-engine","title":"LS Electric Water Pump Adapter Plate, Fit a Big Block Chevy Style Electric Pump to an LS","description":"\u003cp\u003eWant an electric water pump on your LS? This plate lets you bolt a big block Chevy style electric pump straight on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdapts BBC style electric water pumps to LS engines\u003c\/li\u003e\n\u003cli\u003eFrees up belt drive space\u003c\/li\u003e\n\u003cli\u003eGaskets and hardware included\u003c\/li\u003e\n\u003cli\u003eSuits Gen III and IV LS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a thermostat?\u003c\/strong\u003e\u003cbr\u003eMost electric pump set-ups use a controller instead. Follow your pump maker's advice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it suit a mechanical pump?\u003c\/strong\u003e\u003cbr\u003eNo, it's for electric pumps only.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eElectric pump frees up the front of the motor and gives you cooling control. Popular with the hot rod crowd.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636563968301,"sku":"1005011668623132-China Mainland","price":64.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S527357b686d94305947b2fb1b48951d2t.webp?v=1791867359"},{"product_id":"ls-engine-lift-plate-hoist-picker-cranet-lifting-plate-bracket-for-chevy-ls-series-lsx-ls-ls1-ls2-ls3-lq4-6-0-6-2-5-3-4-8-gen-3","title":"LS Engine Lift Plate, Hoist Lifting Bracket for LS1 LS2 LS3 LQ4 4.8 5.3 6.0 6.2","description":"\u003cp\u003eLift your LS straight and safe. The plate bolts to the intake manifold holes and gives one central lifting point for the crane.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolts to the LS intake manifold bolt holes\u003c\/li\u003e\n\u003cli\u003eSuits Gen III and IV LS1, LS2, LS3, LQ4, 4.8, 5.3, 6.0, 6.2\u003c\/li\u003e\n\u003cli\u003eMultiple lift holes to balance the engine\u003c\/li\u003e\n\u003cli\u003eBlack powder coated steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lift with the gearbox attached?\u003c\/strong\u003e\u003cbr\u003eYes, use the rear holes to balance it. Always use rated shackles and chains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to remove the intake?\u003c\/strong\u003e\u003cbr\u003eYes, it mounts in place of the intake.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTucks tip: always use rated shackles and chains, and never stand under a hanging motor.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Solid steel construction, made to be used, not hung on the wall\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636564033837,"sku":"1005010359813108-black","price":124.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Scc5f07fca0de431cb5b0cf67ca0b21453.webp?v=1791868651"},{"product_id":"for-ls-camshaft-thrust-retainer-plate-gasket-seal-cam-bolt-kit-12589016","title":"LS Cam Thrust Retainer Plate Kit with Gasket and Bolts, Replaces 12589016","description":"\u003cp\u003eDoing a cam swap on your LS? Fit a fresh retainer plate and seal. This kit replaces GM 12589016.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCam thrust retainer plate\u003c\/li\u003e\n\u003cli\u003eGasket seal and bolts included\u003c\/li\u003e\n\u003cli\u003eReplaces GM 12589016\u003c\/li\u003e\n\u003cli\u003eSuits Gen III and IV LS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I replace this during a cam swap?\u003c\/strong\u003e\u003cbr\u003eYes. The seal is cheap and a leak here means pulling it all apart again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit Gen V LT?\u003c\/strong\u003e\u003cbr\u003eNo, LS Gen III and IV only.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWhile the cam's out, do the seal. Cheap job now, a pain later.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. Steel plate with rubber seal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636564099373,"sku":"1005008737974440-Default Title","price":70.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S72259803dc994f0c931e1bb0184b1c42O.webp?v=1791867360"},{"product_id":"ls-3-bolt-throttle-body-to-ls4-intake-manifold-ls1-tb-dbw-dbc-adapter-551560","title":"LS 3 Bolt Throttle Body to LS4 Intake Adapter 551560, LS1 Throttle Body DBW or DBC","description":"\u003cp\u003eRun a common LS1 3 bolt throttle body on an LS4 intake. Simple bolt-on adapter, great for swaps.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdapts LS1 3 bolt throttle bodies to LS4 intakes\u003c\/li\u003e\n\u003cli\u003eSuits drive-by-wire and drive-by-cable\u003c\/li\u003e\n\u003cli\u003eReplaces 551560\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill I need a tune?\u003c\/strong\u003e\u003cbr\u003eChanging the throttle body type usually needs a tune, especially drive-by-wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it suit other intakes?\u003c\/strong\u003e\u003cbr\u003eIt's made for the LS4 bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBolt-on and done. Grab one with your swap gear and save the hassle.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Default Title","offer_id":67636564164909,"sku":"1005010075246079-Default Title","price":45.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sa31280c83dff4d858cee553adb8f4e60U.webp?v=1791867361"},{"product_id":"aluminum-throttle-body-spacer-for-1999-2007-silverado-sierra-4-8l-5-3l-6-0l-silverado-1500-escalade-yukon","title":"Throttle Body Spacer for Silverado and Sierra 1999 to 2007 4.8 5.3 6.0, Escalade and Yukon","description":"\u003cp\u003eA billet throttle body spacer to dress up your Gen III truck engine. Red or blue anodised finish with gaskets and longer bolts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits 1999 to 2007 Silverado and Sierra 4.8, 5.3, 6.0\u003c\/li\u003e\n\u003cli\u003eAlso Escalade, Yukon, Silverado 1500\u003c\/li\u003e\n\u003cli\u003eRed or blue anodised\u003c\/li\u003e\n\u003cli\u003eGaskets and bolts included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it make more power?\u003c\/strong\u003e\u003cbr\u003eGains are small. It's mainly a dress-up item with a slight throttle response change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to tune after fitting?\u003c\/strong\u003e\u003cbr\u003eNo tune needed for a spacer.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eA bit of bling for the truck motor. Looks the goods under the bonnet.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Red","offer_id":67636564230445,"sku":"1005009535873620-Red-China Mainland","price":84.99,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":67636564263213,"sku":"1005009535873620-Blue-China Mainland","price":84.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/S7ac4aeb1aab44596a81fad62a7663de9r.webp?v=1791868651"},{"product_id":"for-v8-engine-throttle-body-spacer-for-chevrolet-silverado-suburban-for-cadillac-for-gmc-sierra-4-8l-5-3l-6-0l-6-2l-2007-2013","title":"Throttle Body Spacer for Silverado, Sierra and Suburban 2007 to 2013 4.8 5.3 6.0 6.2","description":"\u003cp\u003eA billet throttle body spacer for Gen IV GM trucks. Blue or red anodised, bolts straight on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits 2007 to 2013 Silverado, Sierra, Suburban, Escalade\u003c\/li\u003e\n\u003cli\u003e4.8, 5.3, 6.0, 6.2 V8\u003c\/li\u003e\n\u003cli\u003eBlue or red anodised\u003c\/li\u003e\n\u003cli\u003eGaskets and bolts included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it suit my 1999 to 2006 truck?\u003c\/strong\u003e\u003cbr\u003eNo, see our 1999 to 2007 version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a tune?\u003c\/strong\u003e\u003cbr\u003eNo.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBolts on in about twenty minutes with basic tools. Easy arvo job.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eQuality and warranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in China. CNC-machined from billet aluminium, not cheap cast or pot-metal\u003c\/li\u003e\n\u003cli\u003e2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law\u003c\/li\u003e\n\u003cli\u003eSold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelivery:\u003c\/strong\u003e ships direct from our supplier partner, usually 10 to 20 days.\u003c\/p\u003e","brand":"Tucks Performance","offers":[{"title":"Blue","offer_id":67636564361517,"sku":"1005009566883834-Blue-China Mainland","price":102.99,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67636564394285,"sku":"1005009566883834-Red-China Mainland","price":102.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/files\/Sdef0615932414554a4abb6739a87e507D.webp?v=1791868650"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7594\/7821\/collections\/ls-swap-parts-collection.jpg?v=1791868976","url":"https:\/\/tucksperformance.com.au\/collections\/ls-swap-parts-accessories.oembed","provider":"Tuck's Performance ","version":"1.0","type":"link"}