AN3 Brake Line Fittings Stainless, Banjos, Banjo Bolts and Hose Ends M10 x 1.0, M10 x 1.25, Pair

Build your own braided brake and clutch lines. These stainless AN3 fittings come in pairs and cover the common banjo, bolt and hose end combinations for cars and bikes.

• Sold in pairs, stainless steel
• AN3 hose ends: straight, 45° and 90°, plus straight M10 x 1.0 male and female
• 10 mm banjos: straight, 28°, 45° and 90°
• Single and double banjo bolts in M10 x 1.0 and M10 x 1.25, with copper washers
• Adapters M10 x 1.0 to AN3 and AN3 to M12 x 1.0

Frequently asked questions

Which banjo bolt thread do I need?
Most Japanese cars and bikes use M10 x 1.25. Many European cars use M10 x 1.0. Check your caliper or master cylinder.

What hose do these suit?
AN3 (3/16") PTFE lined stainless braided brake hose.

Is a 10 mm banjo the same as 3/8"?
Close, but use the 10 mm bolt with a 10 mm banjo for a proper seal with new copper washers.

Quality and warranty

• Made in China from stainless steel
• 2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law
• Sold and backed by Tucks Performance, an Australian-owned business. Brakes are safety critical, so have your lines checked by an engineer or brake shop if you are unsure. Not sure what you need? Send us a message

Delivery: ships direct from our supplier partner, usually 10 to 20 days.