Braided Fuel Line Kit 3 m with AN Hose Ends, AN6 AN8 AN10

Everything to plumb a fuel feed and return in one box: 3 metres (10 ft) of braided CPE fuel line and a set of swivel hose ends to suit.

• 3 m (10 ft) braided CPE hose
• AN6, AN8 or AN10 (see options)
• 6 or 10 swivel hose ends, mixed angles (see photos)
• Black, red and black, or silver braid options

AN size chart

Frequently asked questions

How much hose do I need?
Measure your run with a piece of string, then add a little extra. The 3 metre kits do most fuel feed and return jobs on a hot rod.

What size fuel line do I need for my horsepower?
As a rough guide on petrol EFI: AN6 is good to around 500 hp, AN8 to around 800 hp, AN10 beyond that. E85 needs about 30 percent more fuel, so go up a size if you are running it.

How do you install AN fittings on braided hose?
Wrap the hose with tape and cut it with a fine blade or cut-off wheel, push the hose into the socket, then screw the nipple in until it bottoms out against the socket. Oil the threads first and use soft jaws or AN spanners so you do not mark the anodising.

Can you use hose clamps on braided fuel line?
Not on the stainless braid. Braided hose needs proper AN hose ends to seal and hold pressure. Clamps are for push-lock or plain rubber hose.

Quality and warranty

• Made in China with quality braided hose and CNC-machined aluminium hose ends
• Anodised fittings with true 37 degree flares that seal properly
• 2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law
• Sold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message

Delivery: ships direct from our supplier partner, usually 10 to 20 days.