Stainless PTFE Hose End AN3 AN4, Straight 45 90 Degree, AN3 to M10 x 1.0 Female

Small, tough stainless hose ends for AN3 and AN4 PTFE hose. The go-to for custom brake and clutch lines, turbo oil feeds and small gauge lines, where you want steel rather than alloy. The M10 x 1.0 female versions screw straight onto common metric brake and turbo fittings, so you can skip an extra adaptor.

• Stainless steel body, nut and socket, brass olive
• Reusable swivel design, no crimping needed
• AN3 and AN4 in straight, 45° and 90°
• AN3 hose to M10 x 1.0 female in straight or 90°
• Suits PTFE lined braided hose only

AN size chart

Frequently asked questions

Can I make my own braided brake lines with these?
Plenty of builders do, using AN3 PTFE hose and stainless ends. Brakes are safety critical, so check your local rules and get the lines checked by an engineer or brake shop if you are unsure.

Will they fit rubber braided hose?
No. They are made for PTFE lined hose. Use standard AN hose ends for rubber hose.

Is the olive included?
Yes, each end comes with its brass olive. Fit a new olive if you ever rebuild the end.

What is M10 x 1.0 used on?
It is a common metric thread on brake calipers, master cylinders, clutch slaves and many small turbo oil feeds.

Quality and warranty

• Made in China from stainless steel
• 2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law
• Sold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message

Delivery: ships direct from our supplier partner, usually 10 to 20 days.