Black & Gold PTFE Quick-Release AN Fittings

Black and gold PTFE quick-release AN fittings.

Features

• Suits PTFE hose
• Quick-release
• Black and gold finish

Options available

Color: AN12 - 45 degree, AN8 Straight Mouth, AN4 Straight Mouth, AN8 - 90 degree, AN8 - 45 degree, AN6 - 45 degree, AN4 - 45 degree, AN6 Straight Mouth, AN12 Straight Mouth, AN12 - 90 degree, AN6 - 90 degree, AN10 Straight Mouth, AN4 - 90 degree, AN10 - 90 degree, AN10 - 45 degree

How to choose

Match the AN size to your hose (-6AN for most fuel feeds, -8AN to -10AN for oil and bigger fuel systems) and choose straight or angled to suit the run. PTFE hose needs PTFE-specific ends, and push-on ends only suit push-lock hose.

Fitting tips

Wrap the hose with tape and cut it square with a fine blade. Lube the threads, wind the socket on by hand, then tighten with an aluminium AN spanner so you do not mark the anodising. Pressure test before you drive.

FAQs

What AN size do I need?
AN size is the hose bore in sixteenths of an inch. -6AN is about 3/8", -8AN about 1/2", -10AN about 5/8".

Can I use these with PTFE hose?
Only the PTFE-specific fittings. Standard rubber-hose ends will not seal on PTFE.

Are they E85 safe?
The aluminium body is fine. Use PTFE hose for E85.

How tight do I do them up?
Snug plus a quarter turn on the AN flare. Over-tightening damages the 37 degree seat.

Quality you can count on

Every part we sell is checked by our team before it goes on the site. You get a 2-year repair or replacement warranty on top of your rights under Australian Consumer Law. Made in China. Tucks Performance is Australian-owned and run by car people.

Delivery: ships direct from our supplier partner, usually 10 to 20 days.