Aftermarket Steering Wheel Harness Kit to suit Toyota Prado 120 & LandCruiser 100 Series – 300 Series Style Wheel to Stereo (Plug & Play)

Everything you need to fit a 300 Series style steering wheel to your Prado 120 or LandCruiser 100 and have the buttons actually work with your stereo. Both harnesses in one kit – no soldering, no cutting factory wiring.

What's in the kit

• Part 1 – Wheel to clock spring harness. Plugs the 300 Series style wheel straight into your factory 12-pin clock spring plug. Horn, cruise and airbag connections carried through.
• Part 2 – Clock spring to stereo harness. Runs the steering wheel audio buttons (volume, track, mode) from the clock spring down to your aftermarket head unit, with illumination feed so the buttons light up at night.

How it fits

1. Remove the lower steering column cowling.
2. Unplug the two factory plugs from the old wheel and plug Part 1 into the 300 Series style wheel.
3. Plug Part 1 into the factory 12-pin clock spring plug.
4. Run Part 2 from the clock spring plug down behind the dash to your stereo. Android head units plug straight in. Pioneer, Kenwood, Sony, JVC and Alpine units use their 3.5mm steering wheel control input – a 3.5mm patch lead is needed for these.

Suits

• Toyota LandCruiser 100 Series 2003 onwards (or earlier models fitted with the 12-pin clock spring plug)
• Toyota Prado 120 Series – all years

Please check: This kit will not work on a 100 Series built before 2003 unless it has the 12-pin clock spring plug. Pull the cowling and count the pins before ordering – if you're not sure, send us a photo.

Shipping: $12 flat rate Australia-wide. Ships from our Gold Coast warehouse.

FAQ

Do I need both harnesses? If you want the steering wheel buttons to control your stereo – yes. Part 1 alone gets the wheel fitted with horn and cruise. Part 2 is what makes the audio buttons work.

Will my cruise control still work? Yes. The 100 Series and Prado 120 run cruise through the 12-pin clock spring plug and Part 1 carries it through.

Will the horn and airbag work? Yes, both are carried through on Part 1.

Does it work with my factory stereo? No – this kit is for aftermarket head units. The factory stereo doesn't have a steering wheel control input.

Which stereos plug straight in? Most Android head units have a matching plug. Pioneer, Kenwood, Sony, JVC and Alpine use a 3.5mm input and need a patch lead.

I've got a pre-2003 100 Series – will it fit? Only if your clock spring has the 12-pin plug. Early 100 Series use a different plug and this kit won't suit.

Does this include the steering wheel? No – harness kit only. Our 300 Series style wheels are listed separately.

Do I need to cut any wires? No. Fully plug and play.

Is it hard to fit? Around 30–45 minutes for a home mechanic. Disconnect the battery before touching anything airbag related.

Aftermarket product. Fitment is the buyer's responsibility – check your plug before ordering.