Tucks Performance
Fuel Pressure Gauge 0-100 psi Liquid Filled with AN Take-Off Fitting AN4 AN6 AN8 AN10 AN12
Fuel Pressure Gauge 0-100 psi Liquid Filled with AN Take-Off Fitting AN4 AN6 AN8 AN10 AN12
Regular price
$20.99
Regular price
$0.00
Sale price
$20.99
Unit price
per
Tax included.
Couldn't load pickup availability
Check fuel pressure right on the line. The liquid filled gauge screws into an inline AN take-off fitting so you can set your regulator and spot pump problems at a glance.
- Gauge range 0-100 psi, liquid filled to calm needle bounce
- 1/8" NPT gauge thread
- Inline AN take-off fitting in AN4, AN6, AN8, AN10 or AN12
- Also suits oil pressure checks
AN size chart
| Size | Tube / hose size | Approx. mm | Thread |
|---|---|---|---|
| AN4 | 1/4" | 6.4 mm | 7/16"-20 |
| AN6 | 3/8" | 9.5 mm | 9/16"-18 |
| AN8 | 1/2" | 12.7 mm | 3/4"-16 |
| AN10 | 5/8" | 15.9 mm | 7/8"-14 |
| AN12 | 3/4" | 19.1 mm | 1-1/16"-12 |
Frequently asked questions
Where should a fuel pressure gauge go?
Most people fit it after the filter, close to the fuel rail or regulator, so it shows the pressure the injectors see.
What fuel pressure should EFI run?
Most port-injected EFI runs about 43 to 58 psi. Check your injector and ECU setup.
Quality and warranty
- Made in China. Steel gauge case with aluminium AN take-off fitting
- 2-year repair or replacement warranty against defects in materials and workmanship, on top of your rights under Australian Consumer Law
- Sold and backed by Tucks Performance, an Australian-owned business. Not sure what you need? Send us a message
Delivery: ships direct from our supplier partner, usually 10 to 20 days.
